To access the Linksys interface, enter " or "192.168.1.1" into your web browser. Just click Check for Updates, and you're good to go.Go to a Web browser and enter either " or "192.168.1.1." Enter your username and password ("admin" and "password" for most models, if you haven't changed them — although some older models don’t have usernames), then click on the Advanced tab on the top of the screen.First, ensure that you're on the same network as your router.Then, visit either "dlinkrouter.local" or "192.168.0.1" in a web browser.Advanced remote support tools are used to fix issues on any of your devices.The service includes support for the following: NETGEAR Pro SUPPORT services are available to supplement your technical support and warranty entitlements.While some of the company's routers can update their firmware automatically, the company website provides Briefly, go to the Amped Wireless website and visit its support section.
Click More Settings on the site’s left panel, then Management, then Upgrade Firmware. (If you never specified a username and password, they're both "admin.") Go to the Configuration Page and select Firmware Version.Because Cisco Linksys are the most common home router, this article shows the process on a Cisco E4200 wireless router. Keeping the router up-to-date is just as important as keeping your system’s hardware and software current.Remember each router is different, but upgrading the firmware is essentially the same process. Now that you’re logged into the router, view the firmware version currently on the router. Visit the Cisco Linksys support site and select you router’s model to see if there is an updated version. Make sure not to do anything else on your computer while the process is active. You won’t be able to access the Internet or network while it’s rebooting. Then, upload your unzipped file and let the router install the update.Asus also recommends you reset the router after the installation is complete by pressing the reset button on the router's underside for 5 seconds.